Vinyl homogeneous flooring has the following characteristics:

- Environmentally friendly and healthy: the main raw material is of vinyl homogeneous flooring is PVC, which does not contain recycled PVC, has less plasticizer. Some vinyl homogeneous flooring have PUR wax-free technology with low maintenance cost and can be recycled and reused.

- Superior material performance: it is homogeneous and transparent with uniform patterns and materials throughout the body and uniform and compact structure. It has strong wear resistance which reach to the classification of EN685 M grade and above. It can be used in extremely high-traffic commercial places and high-traffic industrial places. The cigarette butt resistance is better than that of multi-layer laminate PVC flooring. Surface burn marks can be polished away and serious scratches can be welded.

- Good anti-slip performance: the floor surface of vinyl homogeneous flooring is anti-slip treated, which can provide good safety protection in humid environments and effectively reduce the risk of slipping. It is suitable for places for the elderly and children.

- Stain-resistant and easy to clean: the surface of vinyl homogeneous flooring is smooth and not easy to stain. It can be scrubbed with clean water and a small amount of detergent every day. It is simple to maintain and does not require special care.

Technical Date

The common technical parameters of vinyl homogeneous flooring are as follows:

Specifications

- Thickness: The common thickness is 2mm, and the thickness of 2.5mm, 3.0mm and other thicknesses can also be customized. The average thickness deviation is between -0.10mm and 0.13mm, and the single value deviation is between -0.15mm and 0.15mm.

- Width and length: The general width is 2m and the length is 20m.

Physical properties

- Gram weight: For example, 2mm thick T-grade wear-resistant vinyl homogeneous floor is about 2800 grams per square meter, and P-grade is about 3100 grams per square meter.

- Residual depression value: should be ≤0.1mm.

- Wear resistance: The volume loss value of P-grade is between 2.0 mm³-4.0 mm³; the wear resistance grade can be divided into T-grade, P-grade, M-grade, F-grade, etc. T-grade has the best wear resistance, and its PVC content is as high as 75% or more, and the maximum service life can reach 50 years.

Chemical properties

- Volatile content: non-foamed glass fiber substrate ≤75g/m², non-foamed other substrates ≤10g/m².

- Vinyl chloride monomer: ≤5mg/kg.

- Soluble lead content: ≤20mg/m².

- Soluble cadmium content: ≤20mg/m². Fireproof performance

- Combustion performance: critical heat radiation flux CHF ≥4.5kw/m²; 20S flame tip height (fs) ≤150 mm; smoke production (S1) ≤750%×min.

Anti-slip performance

- Anti-slip grade: If it reaches R9 grade, it can effectively reduce the risk of slipping.

Antibacterial performance

- Antibacterial rate: The antibacterial rate of some high-quality products is ＞99%.

Environmental performance

- Formaldehyde content: Vinyl homogeneous flooring should meet relevant environmental protection standards, such as E1 grade, or even higher formaldehyde-free standards.

Stain resistance

- Stains such as carbon ink should disappear completely after washing with water.