How to slove the problem of PVC flooring welding rod falling off
PVC flooring is widely used in commercial and residential places because of its beautiful, durable and easy-to-clean features. However, during use, sometimes the welding rod may fall off, which not only affects the appearance, but may also cause bubbling and bulging of the flooring, and even affect the safety of use in severe cases. So, what is the reason for the welding rod falling off of PVC flooring? And how to solve it?
1. Reasons for PVC floor welding wire falling off
Improper construction process
Welding temperature and time issues: welding temperature is too high or too low, welding time is too short or too long, which may lead to the quality of welding wire decline and easy to fall off. Welding temperature and moving speed do not match. If the welding speed is too fast, the welding rod will not dissolve enough and will not stick firmly; if the welding speed is too slow, the welding wire may burn, which will also affect the bonding effect.
Insufficient floor contact: During welding, the two pieces of PVC floorings are not in full contact, resulting in a reduction in the contact area between the welding rod and the flooring, a decrease in adhesion, and easy to fall off.
Poor quality of floor materials
Some low-quality PVC flooring materials may not achieve the ideal bonding effect when welding, causing the welding rod to fall off easily. Therefore, it is very important to choose high-quality floor materials.
Ground environmental factors
Ground moisture: Ground moisture can cause the PVC flooring to be pulled and shifted, and then pull off the welding rod.
Glue dissolution: When the ground glue is dissolved, it will also cause the flooring to shift and affect the firmness of the welding rod.
Improper maintenance
During use, improper maintenance such as prolonged water accumulation and scratching the welding wire with sharp objects may also cause the welding wire to fall off.
2. Solution
Choose a professional construction team
When laying PVC flooring, you should choose a construction team with rich experience and professional skills to ensure that the construction process meets the specifications and avoid problems such as welding rod falling off.
Choose high-quality flooring materials When purchasing PVC flooring, you should choose a brand with reliable quality and good reputation to ensure that the quality of the flooring materials meets the standards.
Control the floor environment
Before laying the PVC flooring, the floor should be thoroughly cleaned and dried to ensure that there is no moisture or stains on the floor. At the same time, choose glue that is suitable for the floor environment to avoid glue dissolution and floor displacement.
Regular maintenance
During use, the PVC flooring should be cleaned and maintained regularly to avoid improper behaviors such as long-term water accumulation and scratches by sharp objects. Once problems such as welding wire falling off are found, they should be repaired in time to prevent the problem from expanding.
3. Summary
The welding line falling off of PVC floor is a problem that needs attention. It not only affects the appearance, but also may pose a potential threat to the safety of flooring use. By choosing a professional construction team, high-quality floor materials, controlling the ground environment and regular maintenance, we can effectively avoid problems such as welding line falling off and ensure the long-term use of PVC flooring.